871287 LS3 L98 L76 L77 STAGE 2 HIGH PERFORMANCE CROW CAM CAMSHAFT N/A or S/C
SKU: 871287
Great Cam for 6.2 LS3 N/A engines with standard or 2500 rpm stall converter or 6.0L N/A manual engines
This cam is a good choice if you are planning to add a supercharger later.
Expect around 330rwkw on 6.0 naturally aspirated manual with 3 inch exhaust.
Power range 2500-6500 rpm
Kit includes
Application | RPM Range | Part No. | Adv. Duration | .050" Duration | Valve Lift | LSA | Lash Intake | Lash Exhaust | |||
Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | ||||||
Max lift cam, high acceleration. Gives max performance without losing bottom end. Needs valve spring and ECU calibration. (See Fitting Notes 1 & 2) | 2200-6500 | 871287 | 278 | 302 | 227 | 244 | .607" | .610" | 114 | HYD | HYD |
Recommended Parts to suit Camshaft
Installed Height | Parts Kit | Valve Spring | Retainer | Locks | Stem Seal | Spring Seat | Lifters (See Notes) |
Timing Kit | Pushrods (See Notes) |
Rockers |
1.780" | VTKLS8 | 4438-16D |
10708-16 |
10701-16 | S9-16 | VSS1251 | 5250 | See Notes | PR-957-16 | N/A |
5251 | PR-5735-16 |
Note: Springs marked with xxxx-xxD denotes that it is a double spring.
Notes: Valve Lift calculated using standard 1.70 rocker ratio. Advertised duration shown at .006". Spring installed height should be checked before ordering.