Peel & Stick Heat Shield Light Face (600 x 1060) Automotive

SKU: PS_HSL_L_X1
Peel & Stick Heat Shield Light Face (600 X 1060) Automotive
Peel & Stick Heat Shield Light Face (600 X 1060) Automotive
Peel & Stick Heat Shield Light Face (600 X 1060) Automotive
Peel & Stick Heat Shield Light Face (600 X 1060) Automotive
Peel & Stick Heat Shield Light Face (600 X 1060) Automotive

Peel & Stick Heat Shield Light Face (600 x 1060) Automotive

SKU: PS_HSL_L_X1
Regular price $121.99
/
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way
Tax included.
Description
Car Builders Peel & Stick Heat Shield is the highest quality heat shield material currently available on the market. Constructed from a needle punched fibreglass with a polyester core it comes complete with a super tough aluminium face. This product will not separate or pull apart like other products on the market. The product is so good that leading automotive manufactures use it on production vehicles.   Car Builders Peel & Stick Heat Shield Light is easy to form. As the top aluminium lay is thinner (0.05mm), this product suits applications where greater versatility is required such as on uneven or irregular surfaces such as under bonnet, motorcycle farings, inner guards, air boxes, batteries and anything that requires greater formability.   For applications over flatter surfaces or near exhaust systems and heat elements use Car Builders Peel & Stick Heat Shield Heavy (0.25mm aluminium thickness) . Unsure which product to use? Watch our YouTube clips below.   The product has been oven test for 30 hours with no failure at 475ºF (246ºC)


Car Builders Peel & Stick Heat Shield has a unique pressure sensitive adhesive making it easy and versatile to install, particularly in tight spaces. It is widely used as a thermal and acoustical barrier in many industries and works effectively to block heat around fuel tanks/systems, tunnel shields, floor pans, exhaust systems, body shields, transmissions, fluid lines and to protect non ferrous materials.

Features/Advantages

  • Light Weight
  • Easily formed into place
  • Very effective in limited space
  • Approved at several major OEM's
  • Acoustical sound deadening benefits without the squeak or rattle issues of stampings
  • Interior or exterior applications
  • Easy installation - just peel off the release liner and adhere to surface.

Applications

  • Fuel tank/system
  • Tunnel shields
  • Floor pans
  • Exhaust systems
  • Body shields
  • Transmissions
  • Steering components
  • Fluid lines
  • Rubber mounts
  • Axle bushings
  • Here at Malex Motorsports all of our items are in stock in our Sydney based store, ready to ship or pick up.
  • NOW IN SMEATON GRANGE!

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Spray Adhesive Automotive Trim & Roof Lining Glue
Spray Adhesive Automotive Trim & Roof lining Glue
$29.95
Max Heat High Temp Sleeve 15Mm 20Mm Or 25Mm Diameter Roll Length 1M
Max Heat High Temp Sleeve 15mm, 20mm or 25mm diameter roll length 1m
from $23.99
Sold Out
Wiring Loom Underbody Tape (19Mm X 25M) Ls External Harness
Wiring Loom Underbody Tape (19mm x 25m) LS External Harness Tape
$9.99
Sold Out
Peel & Stick Heat Shield Heavy Face (600 X 500Mm) Automotive
Peel & Stick Heat Shield Heavy Face (600 x 500mm) Automotive
$72.00
Peel & Stick Heat Shield Heavy Face (600 X 1060Mm) Automotive
Peel & Stick Heat Shield Heavy Face (600 x 1060mm) Automotive
$130.00
Pro Loom Lite - Wiring Loom/Harness Protection Wrap 8 13 19 25 And 29Mm Diameter
Pro Loom Lite - wiring loom/Harness protection wrap 8, 13, 19, 25 and 29mm diameter
from $19.99
Recently viewed