You may also like
More from Car Builders Insulation/Sound Deadener
Recently viewed
Glues aren’t what they used to be....... you won't be disappointed with our contact adhesive.
Car Builders Premium Spray Adhesive is suitable for all your upholstery projects, from roof linings to carpet. Car Builders Spray Adhesive is manufactured right here in Australia and has been tested and proven at 120°C. These highly charge cans feature an easy to use adjustable nozzle which spray out in a thick splatter type pattern. Not to be mistake for fine mist contact adhesive this is an Industrial grade glue that will cover large surfaces.
Simply spray both surfaces allow a short amount of time to tack and bond 2 x materials together.
Great for:
Coverage
7sq/m per can Note: both adhering surfaces must be coated therefore allow 3.5sq/m coverage per can.
Clean up
Clean overspray with Mineral Turpentine or Eucalyptus
Specifications:
7sq/m coverage per can Note: both adhering surfaces must be coated therefore allow 3.5sq/m coverage per can.
Application should be between 16°C - 27°C.
Spray about 10-20 cm away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the
surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. Allow the adhesive to tack off until no adhesive transfers to the knuckle when touched. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.