LS Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 to 3/8 NPT LS1

SKU: E3-551179
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor
Ls Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 To 3/8 Npt Ls1 Adaptor

LS Swap Coolant Temperature Sensor Sending Unit Adapter M12 1.5 to 3/8 NPT LS1

SKU: E3-551179
/
  • Secure payments
  • In stock, ready to ship
  • Inventory on the way
Tax included.
Description

Male M12-1.5 to Female 3/8"-18 NPT Adapter

  • This adapts SBC/BBC (3/8" NPT) coolant temperature sensors to fit into LS series cylinder heads
  • Compatible with: all GM LS Series Engines
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
  • Includes: 1 aluminum adapter, 1 sealing washer
  • Will fit sensors with .85" length, measured from probe tip to the outer edge of adapter. Most aftermarket gauges will use a 3/8" NPT thread adapter (usually included with gauge)

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from Newest Products
Tuff Mounts Engine Mounts for Holden V8 in HK HT HG TM001
TUFF MOUNTS Engine Mounts for LS Conversion into VT-VX-VY Commodore V6 K Frame
6 Circuit Haltech Fuse Box with Lid
6 Circuit Haltech Fuse Box with Lid
Haltech iC-7 / uC-10 OBDII to CAN Cable Length: 1400mm / 55in
Haltech iC-7 / uC-10 OBDII to CAN Cable Length: 1400mm / 55in
L76 L77 Genuine GM Cam & Lifter Kit
L76, L77 Genuine GM Cam & Lifter Kit
L76 L77 Genuine GM Cam Lifter Head Gasket & Head Bolt Kit
L76, L77 Genuine GM Cam, Lifter, Head Gasket & Head Bolt Kit
L76 L77 Genuine GM Standard Camshaft Single Bolt 12625438
L76, L77 Cam Genuine GM Standard Camshaft Single Bolt 12625438
Recently viewed
Back to Newest Products