SKU: 871287K
You may also like
More from Crow Cams - Camshafts
Recently viewed
We are in the process of updating our shipping quote system. If shipping is not calculating at checkout please contact the store.
We are in the process of updating our shipping quote system. If shipping is not calculating at checkout please contact the store.
Great Cam for 6.2 LS3 N/A engines with standard or 2500 rpm stall converter or 6.0L N/A manual engines
This cam is a good choice if you are planning to add a supercharger later.
Expect around 330rwkw on 6.0 naturally aspirated manual with 3 inch exhaust.
Power range 2500-6500 rpm
Kit includes
Application | RPM Range | Part No. | Adv. Duration | .050" Duration | Valve Lift | LSA | Lash Intake | Lash Exhaust | |||
Intake | Exhaust | Intake | Exhaust | Intake | Exhaust | ||||||
Max lift cam, high acceleration. Gives max performance without losing bottom end. Needs valve spring and ECU calibration. (See Fitting Notes 1 & 2) | 2200-6500 | 871287 | 278 | 302 | 227 | 244 | .607" | .610" | 114 | HYD | HYD |
Recommended Parts to suit Camshaft
Installed Height | Parts Kit | Valve Spring | Retainer | Locks | Stem Seal | Spring Seat | Lifters (See Notes) |
Timing Kit | Pushrods (See Notes) |
Rockers |
1.780" | VTKLS8 | 4438-16D |
10708-16 |
10701-16 | S9-16 | VSS1251 | 5250 | See Notes | PR-957-16 | N/A |
5251 | PR-5735-16 |
Parts Kit includes: Valve Springs, Retainer, Locks, Stem Seals & Spring Seats where needed.
Camshaft, Lifters, Timing Kit & Pushrods are not Included in Parts Kit. Order Separately.
Note: Springs marked with xxxx-xxD denotes that it is a double spring.
Notes: Valve Lift calculated using standard 1.70 rocker ratio. Advertised duration shown at .006". Spring installed height should be checked before ordering.
Lifter Notes: 5250 is OEM style drop in lifter using original buckets. 5251 is tie bar style lifter.
Pushrod notes: Standard pushrod length listed for reference only. Pushrod length needs to be checked on assembly prior to ordering.
Timing KitsEngine | Single Row | Double Row | Triggers |
LS1, LS6 5.7L 3 Bolt Cam | CS8LS1-SR | CS8LS1 | 0 |
LS2 6.0L 3 Bolt Cam | CS8LS2-SR | CS8LS2 | 1 |
LS7 7.0L 3 Bolt Cam | CS8LS7-SR | CS8LS7 | 4 |
LS3 6.2L, L76, L98 6.0L Single Bolt Cam NON AFM |
CS8LS-VE-SR | CS8L98 | 4 |
L76, L98 3 Bolt Cam Conversion | CS8LS7-SR | CS8LS7 | 4 |
VE 3 Bolt Gear Genuine GM | CS12586481 | 4 | |
3 Bolt Heavy Duty Steel Cam Gear | CS8LS-VE3 | 4 |
Fitting Notes:
1. Must use Performance Springs. 2. Must use Performance Retainers. 3. Machining Required to fit these components. 4. Must use performance seal. 5. Notes 1-4 Apply to this part number. 6. Check valve train geometry before ordering pushrods. 7. Pushrod Length varied in this model. Check length before ordering. 8. Spring height varies in models, check spring pressure before installation.