News RSS

  Malex Motorsports TR6060 T56 Shifter Relocation Kit Fitting Instructions Malexmotorsports.com   Check all parts are accounted for. The shifter normally comes partly assembled. Parts list includes:  Shifter pivot assembly Linkage Clamp assembly Base plate Shifter stick 6 x 8 mm spring washers 10mm linkage pin 12mm linkage pin 2 x 10mm E clips 2 x 12mm E clips 4 x button head M8 x 16 socket screws 2 x zinc bolts M8 x 30 Bolt the shifter pivot assembly to the base plate using the 4 button head M8 x 16 socket screws and 4 of the 8 mm spring washers...

Read more

MECHANICAL SPEEDOMETER DRIVE BOX SPEEDBOX™ Mechanical Speedometer Drive Box. (Note: for for U.S. vehicles only) The Speedhut SpeedBox is designed to operate a cable-driven mechanical speedometer using an electric speed signal from GPS, CAN-Bus speed data through the OBDII, or Vehicle Speed Sensor (VSS). The Speedbox can be installed in the dash or under the hood. (The Speedbox is not waterproof). Installation Instructions: Disconnect negative (-) battery cable. Connect the included mechanical speedometer cable to the back of the Mechanical Speedometer. Route the cable carefully to meet up with the Speedbox™ in desired location, making sure not bend the cable...

Read more