BRIAN TOOLEY L76 L77 L98 LS3 SHAFT ROCKER KIT TRUNNION UPGRADE BTR

SKU: E21-BTRSRKR3KIT
Brian Tooley L76 L77 L98 Ls3 Shaft Rocker Kit Trunnion Upgrade Btr Trunnion Kit
Brian Tooley L76 L77 L98 Ls3 Shaft Rocker Kit Trunnion Upgrade Btr Trunnion Kit
Brian Tooley L76 L77 L98 Ls3 Shaft Rocker Kit Trunnion Upgrade Btr Trunnion Kit
Brian Tooley L76 L77 L98 Ls3 Shaft Rocker Kit Trunnion Upgrade Btr Trunnion Kit

BRIAN TOOLEY L76 L77 L98 LS3 SHAFT ROCKER KIT TRUNNION UPGRADE BTR

SKU: E21-BTRSRKR3KIT
Regular price $575.00
/
  • Secure payments
  • Low stock - 2 items left
  • Inventory on the way
Tax included.
Description

One of the most common causes of engine failure in the LS engine range is in valve train. When a rocker trunnion or rocker bolt fail the imminent result will be the rocker pushing on the valve retainer and releasing the collets causing the valve to drop. At this point its game over. In most cases this will result  a damaged cylinder head, piston and more often than not, a split bore.  It can be an expensive exercise trusting the single M8 bolt to keep your rockers aligned. These new rocker shafts from Brian Tooley are the best value upgrade to keep your LS alive. While using your original rockers you will now have five bolts  on a common shaft per rocker pair. 

Pictured with optional M8 12point rocker bolts which are available separately.

Brian Tooley is on the forefront of race cam development. Here at Malex we import BTR products direct from the US and KEEP THEM IN STOCK in our Sydney based store ready for pickup or delivery.

 BTR LS3 SHAFT ROCKER KIT 

Introducing the new BTR Shaft Rocker Kit – The Next Step in the Evolution of LS Rocker Arm Trunnion Kits

 

Performance-minded engine builders know there is an inherent issue with valve train deflection when using stock rocker arm mounting in Chevrolet Gen III-IV-cylinder heads. The new BTR shaft rocker system significantly reduces that deflection thereby improving performance and durability. This kit features technology typically only found in high-end shaft rocker systems. The shaft rocker system consists of a billet steel stand equipped with four shafts per cylinder head, fasteners and bearings. The shafts are made from genuine 52100 bearing steel. Each pair of rockers has five fasteners mounting them to the rocker stand compared to the traditional single bolt per rocker configuration. During the development of this system, both aluminum and steel stands were tested - steel reigned supreme. The new BTR shaft rocker kit is ready for assembly using your existing stock rockers.


WILL NOT FIT TRICKFLOW LS3 HEADS

KIT INCLUDES THE FOLLOWING : 

SKU Description Quantity
SRKR3-BASE BTR LS3 SHAFT ROCK SYSYEM - STAND 2
SRKR3Shaft BTR LS3  SHAFT ROCK SYSYEM - SHAFT 8
39541 BOLT FOR ROCKER STAND 24
SR/CLIP BTR ROCKER SHAFT SNAP RING 33
TK/BEARING-33 BTR ROCKER ARM TRUNNION BEARING KIT OF 33 1

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Ls Exhaust Manifold / Header Flange Bolts Ls1 Ls3 Ls2 Lsx Set Of 12 Grade 12.9 Bolt
LS Exhaust Manifold / Header Flange Bolts LS1 LS3 LS2 LSX set of 12 Grade 12.9
$19.95
LS1 LS2 LS3 rear main seal
LS1 LS2 LS3 LS Rear main seal plate gasket kit Genuine GM VT-VF
$143.00
Sold Out
Ls Engine To Transmission Bell Housing Bolts Set Ls1 Ls2 Ls3 Lsa Gearbox Bolt Set
LS Engine to Transmission Bell Housing Bolts Set LS1 LS2 LS3 LSA Gearbox
$19.95
LS LS1 LS2 LS3 sump oil pan Gasket
Genuine GM LS Sump Gasket 12612350 LS1 LS2 LS3 L98 L76 L77
$78.00
Ls1 Front Crank Seal For Timing Case Genuine Gm/National Ls2 Ls3 L98 Ls
LS1 front crank seal for timing case Genuine GM/National LS2 LS3 L98 LS
$30.00
Recently viewed